Drysuit inflation valve with integrated 12V connector.
 

• Available with APEKS or SI-TECH screw size,
• moveable head equipped with medium pressure connector,
• moveable head provides freedom in optimal and convenient arrangement of the E/O cord and the hose,
• made of two electrical connectors on opposite sides of the cable - used to connect with the battery adapted to underwater usage; and watertight connector to connect SANTI Heating System, exclusively,
• works with power supply no higher than 12V,
• total length of the cable including plugs - approx. 55cm,
• the set include a two piece nut.

Valve placement:

The inflation valve should be fitted on the chest area, where it can be easily reached. The place of fitting the valve needs to be of the right size and the rubber backing patch should be bonded to the outside of the drysuit with a suitable adhesive. When positioning the valve try to ensure that it is not covered by other pieces of diving equipment, affecting access to the valve.

Hose connection:

To mount the medium pressure hose to the end of the SANTI Thermovalve pull down the ring of the hose and slide it onto the end of the SANTI Thermovalve.

Valve operation:

Before each dive it is advisable to check the tightness of the drysuit valves to ensure leak free diving. You cannot dive with too much weight. Choose a safe, shallow place to test your buoyancy. Once in the water, on the surface blow sufficient air into your drysuit by pressing the button on the drysuit inflation valve to provide strong positive buoyancy.

Care And Maintenance:

SANTI Thermovalve works as a regular valve. Also, it allows for collision-free connection of the inner layers of diving gear (vest or undersuit) by means of properly integrated wiring which can be powered by the batteries up to 12V outside the drysuit.

Available sizes:

XS, S, SL, M, ML, MLL, LS, L, LL, LLL, XLS, XL, XLL, XXLS, XXL, XXXL,
Made To Measure option available.

Technical info:

• maximum heating temperature 45°C,
• maximum heating power: 110 W,
• works with the following batteries:
• 24Ah battery: 2h30min ~ 3h of heating,
• works only with the batteries of maximum voltage of 12V,
• safety switch preventing from overheating and too strong current,
• made of Thinsulate™ BZ400 (420g/m2),
• made of fully breathable materials,
• keeps you warm even when heating is switched off,
• regularly distributed heating wiring that allows you a free movement,
• warms up the whole torso, thighs and arms,
• extra pocket for the wire ends,
• waterproof plug, compatible with other SANTI products, flexible and overheating resistant wires,
• additional wires integrated to plug in the heating gloves in standard,
• P-valve holes on both sides in standard,
• two sides pockets,
• water-resistant cuffs,
• tapes which supply air to the dry gloves,
• two-way zip.

The Avatar 102 AIRON Drysuit, an innovative and superior design drysuit that takes a step further. Utilizing modern and breathable Cordura Nylon Oxford fabric for increased resistance, it seamlessly combines comfort and durability. 

Design

AIRON model pioneers with color, prints, orange suspenders and exceptional hi-vis orange pocket. We made it for divers seeking innovation and superior design. Our philosophy remains centered around the benefits of diving in a modern, breathable membrane drysuit that provides exceptional comfort.

Comprehensive range of features in a full, technical drysuit configuration: telescopic torso, two technical pockets, slim fit and good air mobility.

What you'll find in the Avatar 102 Airon:

•     Innovative, breathable, four-layer nylon membrane fabric
•     260 g/m2 Cordura Oxford Nylon reinforcement in sensitive areas with a slightly thicker version
•     Vapor-permeable membrane allowing increased comfort on the surface
•     Special bonding of seams for maximum drysuit flexibility
•     Available in 12 standard sizes for men; women's model will be introduced later.

The Avatar 102 Airon offers a comprehensive range of features in a full, technical drysuit configuration:

•     Advanced ergonomic cut eliminating cross-seams at underarms and crotch for unparalleled mobility and seam durability.
•     Telescopic torso design for full body mobility and adaptability underwater.
•     Original internal suspenders and crotch strap ensuring proper drysuit positioning on the body.
•     Watertight front zipper with protective suit fabric patch.
•     Additional reinforcements on knees, elbows, and a specially designed crotch patch for increased durability and abrasion prevention.
•     Two large technical pockets with bungee loops and additional pockets, ideal for opening with dry gloves.
•     Comfortable and flexible neoprene boots.
•     Apeks valves.
•     Latex neck seal with neoprene insulation.
•     Smart Seals system in the sleeves with latex wrist seals.
•     Unique design with sublimations and a special pocket design for increased visibility while diving.
•     Comes with a modern, comfortable drysuit backpack and neoprene hood.

SUIT COMPONENTS:

BOOTS:

The drysuit is equipped with modern, comfortable waterproof boots made of 3-millimeter neoprene. The inside is reinforced with an additional insole, while the outside features a rubber toe and heel guard. The boots have a fin strap tab and an ankle strap to prevent excess air from collecting. The boot sizes are matched to the drysuit sizes and accommodate warm thermal liners or extra pairs of diving socks.

POCKETS:

The 102 Airon drysuit features two large and deep technical pockets with zipped small pockets on both sides' flaps. Both pockets have separate spaces for wet notes, bungee loops, and grommets for water drainage. Made of trilaminate fabric for durability, the right special pocket is in orange Cordura trilaminate, acting as an identification mark for your dive partner and enhancing safety.

FABRIC:

The innovative, breathable, four-layer 260 g/m2 Oxford Nylon membrane material offers vapor-permeability and waterproofness. The quick-drying nylon on the inside and outside ensures a dry suit even after a dive, making it easy to pack and carry.

FINISHING:

The Avatar Airon is reinforced at the knees, crotch, elbows, and buttocks with 280 g/m2 fabric for added protection. The watertight plastic front zipper is covered with a pleat for protection against sand or dirt. The latex seal is shielded by a neoprene warmer, which also overlaps the neoprene hood collar. Inside the drysuit are original orange suspenders to keep the suit in place after the undersuit is worn.

ACCESSORIES:

The Avatar comes with a spacious, waterproof travel bag with suspenders for easy transport to the dive site. The kit includes a neoprene hood, inflatable system hose, and silicone lubricant for the zipper.

The Avatar 102 AIRON Drysuit, an innovative and superior design drysuit that takes a step further. Utilizing modern and breathable Cordura Nylon Oxford fabric for increased resistance, it seamlessly combines comfort and durability. 

Design

AIRON model pioneers with color, prints, orange suspenders and exceptional hi-vis orange pocket. We made it for divers seeking innovation and superior design. Our philosophy remains centered around the benefits of diving in a modern, breathable membrane drysuit that provides exceptional comfort.

Comprehensive range of features in a full, technical drysuit configuration: telescopic torso, two technical pockets, slim fit and good air mobility.

What you'll find in the Avatar 102 Airon:

•     Innovative, breathable, four-layer nylon membrane fabric
•     260 g/m2 Cordura Oxford Nylon reinforcement in sensitive areas with a slightly thicker version
•     Vapor-permeable membrane allowing increased comfort on the surface
•     Special bonding of seams for maximum drysuit flexibility
•     Available in 12 standard sizes for men; women's model will be introduced later.

The Avatar 102 Airon offers a comprehensive range of features in a full, technical drysuit configuration:

•     Advanced ergonomic cut eliminating cross-seams at underarms and crotch for unparalleled mobility and seam durability.
•     Telescopic torso design for full body mobility and adaptability underwater.
•     Original internal suspenders and crotch strap ensuring proper drysuit positioning on the body.
•     Watertight front zipper with protective suit fabric patch.
•     Additional reinforcements on knees, elbows, and a specially designed crotch patch for increased durability and abrasion prevention.
•     Two large technical pockets with bungee loops and additional pockets, ideal for opening with dry gloves.
•     Comfortable and flexible neoprene boots.
•     Apeks valves.
•     Latex neck seal with neoprene insulation.
•     Smart Seals system in the sleeves with latex wrist seals.
•     Unique design with sublimations and a special pocket design for increased visibility while diving.
•     Comes with a modern, comfortable drysuit backpack and neoprene hood.

SUIT COMPONENTS:

BOOTS:

The drysuit is equipped with modern, comfortable waterproof boots made of 3-millimeter neoprene. The inside is reinforced with an additional insole, while the outside features a rubber toe and heel guard. The boots have a fin strap tab and an ankle strap to prevent excess air from collecting. The boot sizes are matched to the drysuit sizes and accommodate warm thermal liners or extra pairs of diving socks.

POCKETS:

The 102 Airon drysuit features two large and deep technical pockets with zipped small pockets on both sides' flaps. Both pockets have separate spaces for wet notes, bungee loops, and grommets for water drainage. Made of trilaminate fabric for durability, the right special pocket is in orange Cordura trilaminate, acting as an identification mark for your dive partner and enhancing safety.

FABRIC:

The innovative, breathable, four-layer 260 g/m2 Oxford Nylon membrane material offers vapor-permeability and waterproofness. The quick-drying nylon on the inside and outside ensures a dry suit even after a dive, making it easy to pack and carry.

FINISHING:

The Avatar Airon is reinforced at the knees, crotch, elbows, and buttocks with 280 g/m2 fabric for added protection. The watertight plastic front zipper is covered with a pleat for protection against sand or dirt. The latex seal is shielded by a neoprene warmer, which also overlaps the neoprene hood collar. Inside the drysuit are original orange suspenders to keep the suit in place after the undersuit is worn.

ACCESSORIES:

The Avatar comes with a spacious, waterproof travel bag with suspenders for easy transport to the dive site. The kit includes a neoprene hood, inflatable system hose, and silicone lubricant for the zipper.