NORD X 300 g on anatomisesti muotoiltu väliasu, joka on suunniteltu pitämään sinut lämpimänä ja kuivana vaativimmissakin ympäristöissä. Waterproof NORD X alusasu on hengittävä ja vettähylkivä. 

Väliasusta löytyy esipuristettu pehmuste ympäristöystävällisestä DuPont™ Sorona® – pehmusteesta, jossa on tikattu vuori. Materiaali joustaa neljään suuntaan, mikä takaa erinomaisen liikkuvuuden. Palat haaroissa ja kainaloissa tekevät venttiiliharjoitteista lasten leikkiä. Asusta löytyy myös Cordura®-vahvistetut polvet ja kyynärpäät, pehmeällä ja lämpimällä fleecellä vuoratut vetoketjulliset reisitaskut, sekä pienempi rintatasku. Kaikki taskut on varusteltu EasyGrip-vetimellä. Waterproof NORD X väliasusta löytyy myös esiasennetut läpiviennit P-valvelle molemmista lahkeista.

Konepestävä 30 asteessa.

Waterproof NORD X Ladies aluspuvusta löytyy sopiva koko: XS, S, M, ML, L, XL, ML/t, M/+, L/+

Waterproof NORD X naisten kokotaulukko

Waterproof NORD X ominaisuuksia:

• Anatominen muotoilu – Kädet, jalat ja vartalo on suunniteltu anatomisesti, parhaan liikkuvuuden mahdollistamiseksi
• Esipuristettu pehmuste – Kevyttä, hengittävää ja lämmintä. Vertaansa vailla oleva pehmeys ja poikkeuksellinen lämpöhäviön kestävyys.
• Nelisuuntainen joustavuus – varmistaa mukavan istuvuuden
• TPU-kalvo – hengittävä, tuulenpitävä ja vettähylkivä ulkokerros
• Cordura-vahvistettu – Polvet ja kyynärpäät on vahvistettu Cordura-kankaalla
• Vetoketjulliset lantiotaskut – Pehmeällä mikrofleecellä vuoratut lantiotaskut lisäävät mukavuutta sukellusten välillä
• Vetoketjullinen rintatasku – Erillinen vetoketjullinen tasku auton avaimille, lompakoille ja muille välttämättömille tavaroille
• Joustava vyötärönauha – Joustava vyötärönauha takana
• Neopreeniset hihansuut – eristävät märkänä. Varustettu peukalolenkeillä
• Matalaprofiilinen fleece-kaula – Vähemmän volyymia käytettäessä kuivapuvun alla. Tarranauhalla suljettava.
• Ilmastoidut verkko-olkapaneelit – Tarjoaa nopean ilman ja kosteuden säätelyn.
• Valmius lisätä henkselit – Valmiiksi asennetut kielekkeet valinnaisten henkselien kiinnitystä varten.
• Esitaivutetut kädet ja jalat – Tarjoaa täydellisen anatomisen istuvuuden sukellusasennossa
• Tiukasti istuvat lahkeet – Vähemmän massaa säärien ympärillä helpottaa kuivapuvun pukemista ja riisumista. Leveät jalkahihnat.
• Vetoketjun vedin – Uudelleen suunniteltu vetoketjun vedin, jossa on turvallinen ote, käsineillä tai ilman.
• Pidempi kaksisuuntainen vetoketju – Miesten versio on varustettu pidemmällä kaksisuuntaisella vetoketjulla pääsyn helpottamiseksi.
• Pee-venttiilille valmis – Esiasennetut ulostulot P-venttiilin letkulle molemmilla puolilla.

Weezle Extreme+ on malliston lämpimin One Piece -aluspuku, joka on valmistettu käsin Isossa-Britanniassa markkinoiden parhaista materiaaleista korkeimpien laatuvaatimusten mukaan. Innovatiivisia kuituja kerrostamalla valmistetaan kestävä ja kevyt aluspuku.

Palkitussa yksiosaisessa unisex-mallissa on 2 lantiotaskuaja  rintatasku tarranauhalla. Hihansuissa on pukemista helpottavat halkiot, jotka poistavat peukalosilmukoiden tarpeen. Myös lahkeissa on joustavat jalkalenkit. Joustava vyötärö. Väri on aina musta. Puvussa on laadukas kaksipäinen vetoketju. Pakattu omaan säilytyspussiin. 

Weezle Extreme Plus Soveltuu erittäin kylmiin vesiin, pitkille dekosukelluksille tai yleensä helposti sukelluksella paleleville.

Features of the new Azimuth series of reels while maintaining the simple, one-handed operation of the dependable Slide Lock series of reels.

Like the Azimuth, the Slide Lock 2 is fabricated from high precision, CNC-machined acetal and stainless steel components. While borrowing from the Azimuth’s ergonomic and low-profile design, this reel retains the unique “thumb flick” locking and unlocking mechanism from the original Slide Lock series. The 400-foot (120 m) size is standard for use as a primary cave reel and is perfect for the extended exploration of any underwater environment. Comes with a stainless steel double bolt snap.

The dimensions of the reel have been thoughtfully chosen for comfort and ease of use, as well as being low profile when clipped off and stowed. A one-piece acetal handle provides a high strength, corrosion-free frame, and an ergonomic grip with or without gloves. The unique in-line clip slots on the handle orient the reel to sit closer to the body when clipped to a D-ring. This design also allows the included double bolt snap to swing out of the way and lay against the handle, negating the need to remove the clip for quick deployment.

By using an all-machined spool design rather than injection molded plastic, tight tolerances can be used at the spool-to-frame interface, making the Slide Lock 2 incredibly smooth to operate and highly resistant to jamming. If the spool does need to be removed, it is a simple procedure using only a 3/16-inch hex wrench to remove the axle. There are no small parts, washers, or clips to lose. A small “fuel gauge” slot on the front panel of the spool allows the diver to see how much line remains at a glance. The fully knurled inner spindle and line-lock holes on the spool side plate completely prevent any slipping of the line on the spool when reeling up.
Tech Info

•     Made in the USA.
•     Frame: Single-piece, machined acetal.
•     Spool: Machined acetal with knurled center core and line lock holes.
•     Hardware: Marine-grade, passivated 316 stainless steel.
•     Thumb-activated, spring-loaded locking pin for one-handed locking and unlocking.
•     “Fuel gauge” slot on spool shows line remaining.
•     400 ft (120 m) of braided, #24 line in white or hi-viz orange.

Features of the new Azimuth series of reels while maintaining the simple, one-handed operation of the dependable Slide Lock series of reels.

Like the Azimuth, the Slide Lock 2 is fabricated from high precision, CNC-machined acetal and stainless steel components. While borrowing from the Azimuth’s ergonomic and low-profile design, this reel retains the unique “thumb flick” locking and unlocking mechanism from the original Slide Lock series. The 400-foot (120 m) size is standard for use as a primary cave reel and is perfect for the extended exploration of any underwater environment. Comes with a stainless steel double bolt snap.

The dimensions of the reel have been thoughtfully chosen for comfort and ease of use, as well as being low profile when clipped off and stowed. A one-piece acetal handle provides a high strength, corrosion-free frame, and an ergonomic grip with or without gloves. The unique in-line clip slots on the handle orient the reel to sit closer to the body when clipped to a D-ring. This design also allows the included double bolt snap to swing out of the way and lay against the handle, negating the need to remove the clip for quick deployment.

By using an all-machined spool design rather than injection molded plastic, tight tolerances can be used at the spool-to-frame interface, making the Slide Lock 2 incredibly smooth to operate and highly resistant to jamming. If the spool does need to be removed, it is a simple procedure using only a 3/16-inch hex wrench to remove the axle. There are no small parts, washers, or clips to lose. A small “fuel gauge” slot on the front panel of the spool allows the diver to see how much line remains at a glance. The fully knurled inner spindle and line-lock holes on the spool side plate completely prevent any slipping of the line on the spool when reeling up.
Tech Info

•     Made in the USA.
•     Frame: Single-piece, machined acetal.
•     Spool: Machined acetal with knurled center core and line lock holes.
•     Hardware: Marine-grade, passivated 316 stainless steel.
•     Thumb-activated, spring-loaded locking pin for one-handed locking and unlocking.
•     “Fuel gauge” slot on spool shows line remaining.
•     400 ft (120 m) of braided, #24 line in white or hi-viz orange.

Features of the new Azimuth series of reels while maintaining the simple, one-handed operation of the dependable Slide Lock series of reels.

Like the Azimuth, the Slide Lock 2 is fabricated from high precision, CNC-machined acetal and stainless steel components. While borrowing from the Azimuth’s ergonomic and low-profile design, this reel retains the unique “thumb flick” locking and unlocking mechanism from the original Slide Lock series. The versatile 200-foot (60 m) size is ideal for many applications, including as a cave primary or cave safety, wreck diving, or shooting lift bags and markers. Comes with a stainless steel double bolt snap.

The dimensions of the reel have been thoughtfully chosen for comfort and ease of use, as well as being low profile when clipped off and stowed. A one-piece acetal handle provides a high strength, corrosion-free frame, and an ergonomic grip with or without gloves. The unique in-line clip slots on the handle orient the reel to sit closer to the body when clipped to a D-ring. This design also allows the included double bolt snap to swing out of the way and lay against the handle, negating the need to remove the clip for quick deployment.

By using an all-machined spool design rather than injection molded plastic, tight tolerances can be used at the spool-to-frame interface, making the Slide Lock 2 incredibly smooth to operate and highly resistant to jamming. If the spool does need to be removed, it is a simple procedure using only a 3/16-inch hex wrench to remove the axle. There are no small parts, washers, or clips to lose. A small “fuel gauge” slot on the front panel of the spool allows the diver to see how much line remains at a glance. The fully knurled inner spindle and line-lock holes on the spool side plate completely prevent any slipping of the line on the spool when reeling up.
Tech Info

•     Made in the USA.
•     Frame: Single-piece, machined acetal.
•     Spool: Machined acetal with knurled center core and line lock holes.
•     Hardware: Marine-grade, passivated 316 stainless steel.
•     Thumb-activated, spring-loaded locking pin for one-handed locking and unlocking.
•     “Fuel gauge” slot on spool shows line remaining.
•     200 ft (60 m) of braided, #24 line in white or hi-viz orange.

Features of the new Azimuth series of reels while maintaining the simple, one-handed operation of the dependable Slide Lock series of reels.

Like the Azimuth, the Slide Lock 2 is fabricated from high precision, CNC-machined acetal and stainless steel components. While borrowing from the Azimuth’s ergonomic and low-profile design, this reel retains the unique “thumb flick” locking and unlocking mechanism from the original Slide Lock series. The versatile 200-foot (60 m) size is ideal for many applications, including as a cave primary or cave safety, wreck diving, or shooting lift bags and markers. Comes with a stainless steel double bolt snap.

The dimensions of the reel have been thoughtfully chosen for comfort and ease of use, as well as being low profile when clipped off and stowed. A one-piece acetal handle provides a high strength, corrosion-free frame, and an ergonomic grip with or without gloves. The unique in-line clip slots on the handle orient the reel to sit closer to the body when clipped to a D-ring. This design also allows the included double bolt snap to swing out of the way and lay against the handle, negating the need to remove the clip for quick deployment.

By using an all-machined spool design rather than injection molded plastic, tight tolerances can be used at the spool-to-frame interface, making the Slide Lock 2 incredibly smooth to operate and highly resistant to jamming. If the spool does need to be removed, it is a simple procedure using only a 3/16-inch hex wrench to remove the axle. There are no small parts, washers, or clips to lose. A small “fuel gauge” slot on the front panel of the spool allows the diver to see how much line remains at a glance. The fully knurled inner spindle and line-lock holes on the spool side plate completely prevent any slipping of the line on the spool when reeling up.
Tech Info

•     Made in the USA.
•     Frame: Single-piece, machined acetal.
•     Spool: Machined acetal with knurled center core and line lock holes.
•     Hardware: Marine-grade, passivated 316 stainless steel.
•     Thumb-activated, spring-loaded locking pin for one-handed locking and unlocking.
•     “Fuel gauge” slot on spool shows line remaining.
•     200 ft (60 m) of braided, #24 line in white or hi-viz orange.

Deluxe Hose Retainer

Keep hoses secure before, during, and after your dive.

Dive rite's wide, (10 cm) Deluxe Hose Retainers are made of a proprietary, stretch material used in bandages. The material holds up to salt water and dries quickly. Silicone strips on the inside of the band grip the tank and prevent rolling. Nylon pull tab (2.5 cm x 5 cm) makes accessing the hose retainer easy, even when using gloves.

•     Made in USA.
•     10 cm wide band made of proprietary, stretch material.
•     Silicone strips placed inside keep band securely in place.
•     Size small fits 127 mm diameter tanks.
•     Size large fits 184 mm and 203 mm diameter tanks.
   

Deluxe Hose Retainer

Keep hoses secure before, during, and after your dive.

Dive rite's wide, (10 cm) Deluxe Hose Retainers are made of a proprietary, stretch material used in bandages. The material holds up to salt water and dries quickly. Silicone strips on the inside of the band grip the tank and prevent rolling. Nylon pull tab (2.5 cm x 5 cm) makes accessing the hose retainer easy, even when using gloves.

•     Made in USA.
•     10 cm wide band made of proprietary, stretch material.
•     Silicone strips placed inside keep band securely in place.
•     Size small fits 127 mm diameter tanks.
•     Size large fits 184 mm and 203 mm diameter tanks.
   

Regulator Necklace

A necessary piece of equipment for advanced and technical divers.

Sizing this necklace is quick and easy: simply tie an overhand knot at the desired length and trim the excess bungee. The knot recesses into the locking cone for a clean look and streamlined design. Attach the necklace onto the second stage effortlessly by pulling both sides of the bungee to tighten the loop around the mouthpiece. Available in standard black, blue, pink, red, and yellow.

It’s time for something more!
Mares is here to offer you a new line of products to expand your range and your limits, to go where you’ve always dreamed of, with style and elegance!

The new Tactical Green line is a set of products that have been specially selected for an introduction to the exciting world of tech diving, combining technology and performance in a unique look!

The Mares Power Plana fins are especially designed for technical diving, including cave exploration. Crafted from high-quality natural rubber with reinforced side ribs, these fins offer durability and flexibility. The high-density material ensures negative buoyancy.

Mares Power Plana fins are especially designed for technical diving, including cave exploration. Crafted from high-quality natural rubber with reinforced side ribs, these fins offer durability and flexibility. The high-density material ensures negative buoyancy, a crucial feature for dry suit and steel backplate setups. Ideal for various kick styles, the fins come with metal spring straps for enhanced comfort and power transmission, connecting directly to the foot pocket for a perfect fit. Dive into your technical adventures with these reliable and versatile fins.

- The fin design is perfect for cave diving
- Made from high-quality natural rubber with reinforced side ribs
- High-density material makes the fins negatively buoyant, a desired feature when using a dry suit and a tek rig with a steel backplate
- High-performing fin - ideal for all kinds of kicks, particularly frog kicks
- Includes metal spring straps for added comfort and better power transmission
- The metal spring strap connects directly to the foot pocket
- Multiple strap positions are possible for a perfect fit
- Spring strap with a nylon cover which includes a nylon pull tab for easier donning

Fin/strap sizes:
- fin size s > strap size r
- fin size r > strap size xl
- fin size xl > strap size xxl
- fin size xxl > strap size xxl